News
Home - News

cold roll forming machine china

There are three subsidiary companies respectively carry out technology development, production processing and mould manufacturing. Plant area 67000㎡ , with machining, heat treatment and assembly plants.if you need cold roll forming machine for sale,you can contact us.

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

HOT PRODUCT

TOP
Online Service×